Omron SYSMAC NX-CIF101 User Manual

Appendices
A - 42
NX-series Communications Interface Units User’s Manual (W540)
A-5 Version Information with CPU Units
This section provides version-related information when connecting Units to a CPU Unit. This section
describes the relationship between the unit versions of each Unit and the CPU Unit, and Sysmac Studio
version, and the specification changes for each unit version of each Unit.
The relationship between the unit versions of each Unit and the CP
U Unit, and Sysmac Studio version
are indicated.
The items that are used in the version com
bination tables are given below.
Refer to the user's manual for the CPU Unit for the models of CPU
Unit to which NX Units can be con-
nected.
• With the combinations of the unit versions/ver
sions shown below, you can use the functions that are
supported by the unit version of the Unit model. Use the unit versions/versions (or the later/higher
unit version/versions) that correspond to the NX Unit models and the unit versions. You cannot use
the specifications that were added or changed for the relevant NX Unit models and the unit versions
unless you use the corresponding unit versions/versions.
• Depending on the type and model of the Unit to which the NX
Unit is
connected, some Units do not
have the corresponding versions given in the table. If a Unit does not have the specified version, sup-
port is provided by the oldest available version after the specified version. Refer to the user’s manu-
als for the specific Units for the relation between models and versions.
• If you use the corresponding unit versions/versions given in the following table or later/higher ver-
sions, refer to the version information in th
e user
’s manual for the CPU Unit.
A-5-1 Relationship between Unit Versions of Units
Interpreting the Version Combination Tables
NX Unit Corresponding unit versions/versions
Model Unit version CPU Unit Sysmac Studio
Model number of NX
Units
Unit version of
the NX Units
Unit versions of the CPU Unit
that are compatible with the NX
Un
its
Sysmac Studio versions that
are compatible with the NX
Units and CPU Unit
Version Combination Tables
NX Unit Corresponding unit versions/versions
Model Unit version CPU Unit Sysmac Studio
NX-CIF101 Ver.1.0 Ver.1.13 Ver.1.17
NX-CIF105
NX-CIF210

Omron SYSMAC NX-CIF101 Specifications

General

Brand	Omron
Model	SYSMAC NX-CIF101
Category	Recording Equipment
Language	English