Omron V680-CA5D01-V2 User Manual

171
RFID System
User’s Manual
SECTION 5
V680 Commands
SECTION 5
Communications
List of End Codes
End codes are expressed in 2-digit hexadecimal.
Refer to Error Lists for details on error checks.
p. 240
Classification End code Name
Normal end 00 Normal end
Command processing terminated.
Polling command query (after communications with Tag were completed normally)
Polling command cancelled.
Normal end (no error) for DATA CHECK command or OVERWRITE COUNT
CONTROL command
01 Polling command received.
02 Polling command query (no results information)
03 Multi-access communications ended
Host communications
error
10 Parity error
11 Framing error
12 Overrun error
13 FCS error
14 Format error
15 Execution condition error
18 Frame length error
Tag communications error 70 Tag communications error
71 Mismatch error
72 Tag missing error
76 Error end (verification error or overwrite count exceeded) for DATA CHECK
command, OVERWRITE COUNT CONTROL command or Data check error in
READ TAG MEMORY ERROR CORRECTION command
77 Data check warning in READ TAG MEMORY ERROR CORRECTION command
79 Tag error
7A Address error
7C Antenna not connected error
7D Write protected error
System error 92 Antenna internal power supply voltage error
93 Internal memory error
9C
Number of Antennas error
Former Antenna setting error

Omron V680-CA5D01-V2 Specifications

General

Brand	Omron
Model	V680-CA5D01-V2
Category	Controller
Language	English