36
First Time Setup
—Continued
When you connect a component to an analog
or digital input, you must assign that input to
an input selector. For example, if you connect
your DVD player to OPTICAL IN 1, you
must assign OPTICAL IN 1 to the DVD input
selector.
Here are the default assignments.
Audio Input Setup
Input selector Audio input
DVD OPT1
VCR/DVR HDMI1
CBL/SAT HDMI2
GAME/TV OPT2
TAPE LINE1
TUNER LINE2
CD COAX
1
Press the [SETUP] button.
ENTER
SETUP
2
Use the Up and Down [ ]/[ ]
buttons to select “1.Input
Assign,” and then press
[ENTER].
3
Use the Up and Down [ ]/[ ]
buttons to select “Audio Input,”
and then press [ENTER].
4
Use the Up and Down [ ]/[ ]
buttons to select an input
selector, and then use the Left
and Right [ ]/[ ] buttons to
select:
COAX
:Select if the component
is connected to the COAXIAL
DIGITAL IN.
OPT1
:Select if the component is
connected to the OPTICAL
DIGITAL IN 1.
OPT2
:Select if the component is
connected to the OPTICAL
DIGITAL IN 2.
LINE1
:Select if the component
is connected to the LINE 1
INPUT.
LINE2
:Select if the component
is connected to the LINE 2
INPUT.
- - - - -:
Select if you’re not using
the input selector.
HTX-22HDEn.book Page 36 Monday, April 7, 2008 2:03 PM
To Next Page
Loading...
Need help?
General
