Onkyo HTX-22HD User Manual

40
Playing Your Components —Continued
You can adjust the brightness of the display.
You can temporarily mute the output of the
HTX-22HD.
To unmute the HTX-22HD, press the
remote controller’s [MUTING] button again,
or adjust the volume. The output is unmuted
and the MUTING indicator goes off.
Muting is cancelled when the HTX-22HD is
set to Standby.
With the sleep timer, you can set the HTX-
22HD so that it turns off automatically after a
specified period.
To cancel the sleep timer, press the [SLEEP]
button repeatedly until the SLEEP indicator
disappears.
To check the remaining sleep time, press
the [SLEEP] button. Note that if you press the
[SLEEP] button while the sleep time is being
displayed, you’ll shorten the sleep time by 10
minutes.
Setting the Display Brightness
Press the remote controller’s
[DIMMER] button repeatedly to
select dim, dimmer, or normal
brightness.
Muting the HTX-22HD
Press the remote controller’s
[MUTING] button.
The output is muted and the
MUTING indicator flashes on
the display.
DIMMER
SLEEP
MUTING
Using the Sleep Timer
Press the remote controller’s
[SLEEP] button repeatedly to
select the required sleep time.
The sleep time can be set from
90 to 10 minutes in 10 minute
steps.
When the sleep timer has been
set, the SLEEP indicator appears
on the display, as shown. The
selected sleep time appears on
the display for about 5 seconds,
then the previous display
appears.
SLEEP indicator
HTX-22HDEn.book Page 40 Monday, April 7, 2008 2:03 PM

Onkyo HTX-22HD Specifications

General

Product color	Black
RMS rated power	50 W
Remotely operated	Yes
Audio output channels	2.1 channels
Satellite speakers RMS power	2 W
Satellite speaker frequency range	70 - 50000 Hz
Subwoofer frequency range	35 - 200 Hz