55
Using the Listening Modes
—Continued
With the Late Night function, you can reduce
the dynamic range of Dolby Digital material
so that you can still hear quiet parts even
when listening at low volume levels—ideal
for watching movies late at night when you
don’t want to disturb anyone.
Notes:
• The Late Night function can be used only
when the input source is Dolby Digital,
Dolby Digital Plus, or Dolby TrueHD.
• The effect of the Late Night function
depends on the material that you are play-
ing and the intention of the original sound
designer, and with some material there will
be little or no effect when you select the
different options.
• The Late Night function is set to Off when
the HTX-22HD is set to Standby.
You can adjust the volume of each speaker
while listening to an input source. These tem-
porary adjustments are cancelled when the
HTX-22HD is set to Standby.
Notes:
•To save these adjustments, press the [TEST
TONE] button.
•You cannot use this function while the
HTX-22HD is muted.
Late Night Function
Press the remote controller’s
[L NIGHT] button repeatedly to
select the following options:
For
Dolby Digital and Dolby
Digital Plus
sources, the options
are:
Off:
Late Night function off
(default).
Low:
Small reduction in
dynamic range.
High:
Large reduction in
dynamic range.
For
Dolby TrueHD
sources, the
options are:
Auto:
The Late Night function
is set to On or Off auto-
matically (default).
Off:
Late Night function off.
On:
Late Night function on.
CH SEL
L NIGHT
Adjusting Speaker Levels
Use the remote controller’s
[CH SEL] button to select each
speaker, and use the Left and
Right [ ]/[ ] buttons to
adjust the volume.
You can adjust the volume of
each speaker from –12 dB to
+12 dB (–15 dB to +12 dB for
the subwoofer).
HTX-22HDEn.book Page 55 Monday, April 7, 2008 2:03 PM
To Next Page
Loading...
Need help?
General
