Advanced Operations
En-50
Note
• This procedure can also be performed on the AV receiver by
using SETUP, the cursor buttons, and ENTER.
• During Audyssey 2EQ
®
Room Correction and Speaker Setup,
messages, etc., that are displayed on the TV screen will appear on
the AV receiver’s display.
Explanatory Notes
a Main Menu
b Sub Menu
c Setting target
d Setting options (default setting underlined)
Using the Setup Menu (HOME)
1
Press RECEIVER followed by HOME.
2
Use e/r to select “Setup”, and then press ENTER.
3
Use q/w to select a main menu item, and then press
ENTER.
4
Use q/w to select a sub menu item, and then press
ENTER.
5
Use q/w to select a setting target, and use e/r to
change the setting.
Press HOME to close the menu.
Press RETURN to return to the previous menu.
RETURN
HOME
RECEIVER
ENTER
q/w/e/r
Remote
indicator
■ Screen saver
If there is no video signal on the current input source and
no operation for a specific time (three minutes by
default), a screen saver automatically comes on.
Tip
• The time until the screen saver activates itself can be changed
in the “Screen Saver” setting (➔ page 65).
• The screen will return to its previous state if the AV receiver is
operated.
Main Menu Speaker Setup
Speaker Configuration
■ Subwoofer
` Yes
` No
a
b
d
c
Main Menu
Sub Menu
To Next Page
Loading...
Need help?
General
Weight and Dimensions
