Oracle ILOM Service-Related Tools
where target-name is as specified for the following components.
Component Target Name and Values
CMIOUs
/DCUs/DCU_x/CMIOUy
SPARC M8-8 and SPARC M7-8 (two PDomains): x is 0 and y is 0–3, or x is 1 and y is 4–7
SPARC M8-8 and SPARC M7-8 (one PDomain): x is 0 and y is 0–7
SPARC M7-16: x is 0 and y is 0–3, x is 1 and y is 4–7, x is 2 and y is 8–11, or x is 3 and y is 12–15
SPs
/Other_Removable_Devices/Service_Processors/Service_Processor_x
/Other_Removable_Devices/Service_Processors/Service_Processor_x/Service_Processor_Module_y
Where x is 0 or 1 and y is 0 or 1
SPPs
/Other_Removable_Devices/Proxy_Service_Processors/
Proxy_Service_Processor_x/Service_Processor_Module_y
Where x is 0–3 and y is 0 or 1
Switch units (SPARC
M7-16)
/Other_Removable_Devices/Scalability_Switch_Boards/Scalability_Switch_Boards_x
Where x is 0–5
Related Information
■
“Oracle ILOM Paths for SPMs” on page 122
■
“Servicing CMIOUs” on page 83
■
“Servicing SPs” on page 117
■
“Servicing Switch Units” on page 189
■
“Prepare a Component for Removal” on page 68
Oracle ILOM Service-Related Tools
Use these Oracle ILOM shell commands when performing service-related tasks.
Oracle ILOM Command Description
help [command]
Displays a list of all available commands with syntax
and descriptions. Specifying a command name as an
option displays help for that command.
set /HOST send_break_action=break Takes the host server from the OS to either kmdb
or OpenBoot prompt (equivalent to a Stop-A),
76 SPARC M8 and SPARC M7 Servers Service Manual • September 2017
To Next Page
Loading...
Need help?
General