Panasonic KX-TGP600 User Manual

Problem Possible Cause Solution
You cannot dial. The number that you
dialed is restricted by your
phone system.
Consult your administrator
or your phone system
dealer/service provider.
Key lock mode is on. To cancel the mode, press
and hold for about 2
seconds.
For details, see 2.9 Key
Lock, page 81.
The radio channel is busy
or a radio communication
error occurred.
Try again later.
The handset stops
working during
operation.
An unknown error has
occurred.
• Turn the handset off, and
then turn it back on.
For details, see
2.3 Location of Controls,
page 28.
• Re-insert the battery and
try again.
For details, see
9.2.1 Battery Installation,
page 132.
You cannot use the
handset/desk phone
during a power
failure.
The handset/desk phone
will not function during a
power failure because the
base unit stops emitting
radio waves.
—
The headset does
not work.
A headset tone cannot be
heard when receiving an
incoming call when the
headset is attached.
• Make sure the headset
tone setting is set to "On".
See Incoming Option, page
148
• Make sure the headset
jack is connected properly.
See 2.3 Location of
Controls, page 28
10.1.8 Troubleshooting
170

Panasonic KX-TGP600 Specifications

General

Speakerphone	-
Voice codecs	G.711a, G.722, G.722.2, G.729A
Handset type	Wireless handset
Product type	IP Phone
Product color	Black
DECT connectable	Yes
Number of handles included	1 pc(s)
Number of DECT wireless handsets	8
Display diagonal	1.8 \
Frequency band	1.88 - 1.90 GHz
Lines quantity	- lines
Phonebook capacity	500 entries
Networking standards	IEEE 802.1Q, IEEE 802.3af
Ethernet LAN (RJ-45) ports	1
Standby time	200 h
Battery type	AAA
Battery capacity	630 mAh
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	25.5 mm
Width	47.8 mm
Height	153.2 mm
Weight	117 g