Panasonic KX-TGP600 User Manual

• The initial setting for the KX-TGP600 IP address is "DHCP—Auto". For information
about your network environment, contact your administrator. For details, see Network
Settings, page 160.
Charger for KX-TPA60
Connect the AC adaptor to the charger.
PNLV226xx
• The AC adaptor should be connected to a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become disconnected.
• Fasten the AC adaptor cord to the cord holder.
• Use only the included Panasonic AC adaptor.
9.2.1 Battery Installation
Open the battery cover, insert the batteries, and close the cover as indicated below.
9.2.2 Attaching the Belt Clip
You can attach the handset to your belt by following the steps below.
1. Push the clip onto the back of the handset.
2. Insert the clip into the designated notches in the handset.
9.2.1 Battery Installation
132

Panasonic KX-TGP600 Specifications

General

Speakerphone	-
Voice codecs	G.711a, G.722, G.722.2, G.729A
Handset type	Wireless handset
Product type	IP Phone
Product color	Black
DECT connectable	Yes
Number of handles included	1 pc(s)
Number of DECT wireless handsets	8
Display diagonal	1.8 \
Frequency band	1.88 - 1.90 GHz
Lines quantity	- lines
Phonebook capacity	500 entries
Networking standards	IEEE 802.1Q, IEEE 802.3af
Ethernet LAN (RJ-45) ports	1
Standby time	200 h
Battery type	AAA
Battery capacity	630 mAh
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	25.5 mm
Width	47.8 mm
Height	153.2 mm
Weight	117 g