Application (View)
Splitting up motion pictures
- 161 - VQT4J31
A single motion picture can be split into 2 parts. This is convenient when you want to keep
just the necessary scenes, or if you wish to delete unnecessary scenes to increase free
space on your card, such as when travelling.
Select [Video Divide] from [Playback] menu
• For the setting procedures of the menu. (→25)
Select the motion picture to split with cursor button and then
press [MENU/SET]
Press at where you want to split a motion picture to pause it
Press
• A confirmation screen is displayed. Select [Yes] with
cursor button, and press [MENU/SET].
• The original motion picture that was split does not
remain.
(There will only be the 2 motion pictures that were
created after the split.)
●
During splitting, do not turn off the camera or remove the card or battery. If you do so,
the motion picture may be deleted.
●
Splitting a motion picture recorded in [MP4] changes the order of the pictures. It is
recommended to display with [Calendar] (Calendar Playback) or [Filtering Play].
●
It may not be possible to split motion pictures that were recorded with a different
camera.
●
Motion pictures with a short recording time cannot be divided.
To Next Page
Loading...
Need help?
General
