Preparations
Using the [Setup] menu
- 31 - VQT4J31
• For the setting procedures of the menu. (→25)
[LCD Display] / [Viewfinder]
Adjust the brightness and colouring of the LCD monitor. When the display is switched to
Live View Finder (optional), the brightness and colouring of the viewfinder are adjusted.
Press to select the setting item, and press to make
adjustments
Press [MENU/SET]
●
Some subjects may look different from their actual appearance, but the recorded
picture will not be affected.
[LCD Mode]
Make LCD monitor easier to see.
■
Settings
: The brightness is adjusted automatically depending on how bright it is around the
camera.
: Makes screen brighter than normal (for outdoor use).
[OFF]
●
Cannot select [ ] in playback mode.
●
[ ] returns to ordinary brightness if there is no operation for 30 seconds when
recording. (Press any button to make the screen brighter again.)
●
Because the picture shown on the LCD monitor screen emphasises brightness, some
subjects may look different than their actual appearance, but this will not affect the
recorded picture.
●
Setting [LCD Mode] reduces the operating time.
To Next Page
Loading...
Need help?
General
