To
household
AC
outlet
(AC 120
V,
60 Hz)
Main unit
[@\f
t-
4"
--=::::~~~-\
L
AC
power supply cord
~::e:-.r~
• Use
Aim at the remote control signal sensor
(~
15), avoiding obstacles,
at a maximum range of 7.0 m (23
It) directly
in
front of the unit.
Do not:
• mix old and new batteries.
• use different types at the same time.
• take apart
or
short circuit.
• attempt to recharge alkaline
or
manganese batteries.
• use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
11m
The included
AC
power supply cords are for use with the main unit and
wireless system only. Do not use them with other equipment. Also, do
not use cords for other equipment with the main unit or wireless system.
To
household
AC outlet
(AC 120
V,
60 Hz)
Main unit
Digital
transmitter
connection
Preparing
the
remote
control
mY
Digital transmitter
g ,
....
rt
f"'~""tiI
you
,''co
"'d<
f;::;E:.==,;::4r~'
:~'l~=fl
oReplace the cover.
eInsert so the poles
(+
and
-)
match those
in
the remote control.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only
with the same
or
equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
~teP5D
AC
cord
connections
• Batteries
Conserving power
The main unit and the wireless system consume a small amount of
power when they are turned off (main unit: approx. 0.3
W,
wireless
system: approx. 0.2 W).
To
save power when they are not to be used for
a long time, unplug them from the household
AC
outlet.
You
will need to reset some memory items alter plugging in the main unit.
• Do not heat
or
expose to flame.
• Do not leave the battery(ies)
in
an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
