Before using
• When the tripod
is
used, the card/battery
door cannot
be
opened. Insert
an
SO
card
and
the battery before attaching this
unit to the tripod.
(-+
24,
31)
Attaching to a tripod
To
detach from the tripod
When detaching from the tripod, only the
unit may detach and the adaptor may not
detach.
In
this case, use the length
adjustment tab to turn the adaptor and
detach it from the tripod.
2 Attach camera base e
on
the
tripod to the tripod receptacle
o on the adaptor.
o
GF$t~
el,OOJ
To
use a tripod (optional), the tripod
adaptor on the 2-way hand strap
(supplied) must be attached to this unit.
(Please carefully read the operating
instructions for how to attach the unit to
the tripod.)
1 Attach the 2-way hand strap
and the tripod adaptor to the
unit.
2 Pass your hand between the
strap and the unit and then
pull the length adjustment tab
f).
• To use as a grip belt.
1 Attach the tripod adaptor e to
the attachment screw for
tripod adaptor
on
this unit.
Strap
.•
fixture
We recommend using the 2-way hand
strap (supplied) to prevent the unit from
dropping.
Attach the 2-way hand strap 0 to
this unit.
19
VQT1D97
To Next Page
Loading...
Need help?
General