With
other
products
With a
TV
3 Rotate
the
mode
dial
to
select
~
orO·
0..--
1
2
Connect
this
unit
to
the
TV.
• If you have a
TV
with an SD card slot,
the motion pictures and still pictures
recorded on the
SO
card maybe
played back on the
TV.
(Refer to the
operating instructions
of
the
TV
for
details about
TV
compatibility.)
• If the images are not displayed
correctly on a wide-screen
TV,
adjust
the aspect setting on the
TV.
(Refer to
the operating instructions
of
the TV for
details.) If the pictures are displayed
squeezed horizontally on
a regular
TV
(4:3), change the [TV ASPECT] setting
on this unit.
(~
76)
5 Start
playback
on
this
unit.
The image and audio are output on
the
TV.
•
If
the
image
or
audio
from
this
unit
is
not
output
on
the
TV
• Check that the plugs are inserted as
far as they can go.
• Check the connected terminal.
•
Check
the
TV's
input
setting
(input
switch).
(For
more
information,
please read
the
operating
instructions
for
the
TV.)
4 Change
the
input
channel
on
the
TV.
• The channel set will differ
depending on the terminal to which
the unit is connected.
VIDEOIN
~
Ic£:lI:
_
AUDIO"'
[~
I
.......
J
AN
~~:~m
~----J
Playback
on
TV
o AV cable (supplied)
• Insert the plugs as far as they will
go.
•
00
not use any other AV cables
except the supplied one.
The motion pictures and still pictures
recorded by this unit can be played back
on a
TV.
• Use the AC adaptor
to
free you from
worrying about the battery running down.
1
Slide
the
terminal
cover
lock
to
OPEN
and
then
open
the
terminal
cover.
75
VQT1D97
To Next Page
Loading...
Need help?
General