• Changing the display style
Press the MENU button, then select
[SETUP]
~
[DATE FORMAT]
~
desired display style and press the
cursor button
in
the center.
[Y/M/D]
[M/DIY]
[DIMlY]
2007.DEC.15
DEC.15.2007
15.DEC.2007
Setup
Adjusting the LCD
monitor
Adjusting the brightness
and color level
1 Press the MENU button, then
select [SETUP]
~
[LCD SET]
~
[YES] and then press the
cursor button
in
the center.
• The date and time function are driven
by a built-in lithium battery.
• Make sure to check the time before
recording.
• If the time display becomes
[-
-], the
built-in lithium battery has run down.
Use the following steps to charge the
battery. When you turn on the power
for the first time after charging, a
message asking you to set the date
and time will appear. Select [YES] and
set the date and time.
To
recharge the built-in lithium battery
Connect the AC adaptor or attach the
battery to the unit and the built-in lithium
battery will be recharged. Leave the unit
as it is for approx. 24 hours and the
battery will save the date and time for
approx. 6 months. (The battery will still
be recharged even if the mode dial is set
to OFF.)
MENU
2 Press the cursor button up or
down to select the item to be
adjusted. Then, press the
button left
or
right to make the
adjustment.
The bar display moves.
• Press the MENU button to exit the
menu screen.
[BRIGHTNESS]:
Brightness
of
the LCD monitor
[COLOR]:
Color level
of
the LCD monitor
41
VQT1D97
To Next Page
Loading...
Need help?
General