Setup
Inserting/removing
an
SO
card
Be
sure
to
set
the
mode
dial
to
OFF
before
inserting/removing
an
SO
card.
If the
SO
card is inserted or removed
while the power is on, this unit may
malfunction
or
the data recorded on
the
SO
card may be lost.
1
Set
the
mode
dial
to
OFF.
• Check that the status indicator has
gone off.
2
Slide
the
card/battery
door
lock
in
the
direction
of
the
arrow
and
then
open
the
card/
battery
door.
lOCK
0 OPfH
CD
-
-~-
1---
____
3
Insert/remove
the
SO
card
into/from
the
card
slot.
• When inserting an
SO
card, place the
label side
0 upwards and press it
straight
in
as far as it goes.
• When removing the
SO
card, press the
center
of
the
SO
card and then pull it
straight out.
4
Close
the
card/battery
door
and
then
slide
the
card/battery
door
lock
in
the
direction
of
the
arrow.
LOCK4DoOPEH
lI
To Next Page
Loading...
Need help?
General