19
English
How to use the remote control
■ Setting the remote control sensor
Before using the remote control, decide the position of
remote control sensor of LCD display.
The remote control sensor is the small black box located on
the left side of the back of LCD display.
Slide and pull the remote control sensor box from the back
side of LCD display until it gets locked in the designated
position.
Follow these steps in the opposite order for returning the
sensor to its original position.
Remote control sensor /
Power indicator
■ Operating range of remote control
Operate the remote control from the front side of remote
control sensor or by keeping it towards the remote control
sensor from the direction where the remote control sensor
can be seen.
Note
●
The remote control system may not function if the remote control sensor of LCD display is exposed to direct sunlight
or strong lighting, or if there is an obstacle in the sensor’s trajectory.
●
You can check whether the power indicator has light up or not by pulling the remote control sensor box.
■ Operating the remote control
•
Do not make strong impact shock.
•
Ensure that remote control is not exposed to liquids such as water. If the remote control gets wet, immediately wipe
it off.
•
Do not expose the remote control to heat or steam.
•
Do not open the remote control cover except when inserting batteries.
To Next Page
Loading...
Need help?
General