46
English
■ Setting method of the scheduler
Setup
Scheduler
Signal Check Priority
Control Setting
Sleep Timer
No Activity Power Off
Off
OFF
Off
Disable
OnPower On Message
Initial Startup
EDID
Software Update(USB)
Last Memory
300 Sec
1.4
Power Management Setting
Restore Default
Schedule 1
EVERYDAY MON TUE
WED THU FRI
SAT SUN
Power On 00 : 00
Input – –
Power Off 00 : 00
Enable Schedule
Reset All Schedules
2017/1/5 05:06
Selecting a programme number
When the cursor is inside the box that shows programme number 1 through 7 on the top left of the screen, you can
selectthetargetprogrammenumberbyusingtheleft(◄)/right(►)buttons.Youcanselectfrom[Schedule 1] through
[Schedule 7].
For enabling the selected programme number, press the [OK] button in the [Enable Schedule] check box and put the
check mark. For disabling a number, uncheck [Enable Schedule] check box.
Set the scheduler of each programme
You can make the following settings in the scheduler
You can move each item by using cursor buttons.
You can select items by pressing the [OK] button and by checking the check box. You can deselect by removing check
mark from the check box.
For the power supply on / off time items, you can set time with the up and down buttons by selecting places from the
time display and pressing the [OK] button. For closing a time setting, press the [RETURN] (
) button.
For input items, you can press the left and right buttons and select the input source.
Scheduler settings
Settings Setting details
[Schedule 1] -
[Schedule 7]
You can select and programme up to 7 schedules.
[EVERYDAY] Selecting this item will run the schedule everyday.
[MON] - [SUN] Selects days of the week on which you want to run the schedule.
[Power On] Sets the time when the power supply will turn on.
[Input] Select the target audio video input source.
[Power Off] Sets the time when the power supply will turn off (standby mode). When you do not
want to set the schedule of power supply off, do not check this item.
[Enable Schedule] It enables / disables the current schedule.
[Reset All Schedules] All schedules will be reset to factory default settings (no schedule).
To Next Page
Loading...
Need help?
General