Pandora Elite v2 User Manual

15
14
USER MANUAL PANDORA ELITE V2
2. Turn the key in the ignition lock to the OFF position (the engine should still be running) and take
it out of the lock (skip this step for cars with a Start/Stop button).
3. Leave the car, close the doors.
4. Arm the system - the engine will be stopped. Now the system is ready to perform remote and
automatic engine start.
Automatic starts
The system allows configuring automatic engine start and stop conditions. Automatic starts can be
configured using a remote control or mobile application. The following conditions can be specified for
automatic engine starts: schedule, time period, engine temperature, voltage. The engine will be stopped
automatically after specified time or when the engine temperature reaches a specified value. The engine
can be also stopped by a user command
! AutomAtIc eNGINe stARts ANd stops by tempeRAtuRe ARe AvAIlAble oNly If A tempeRAtuRe seNsoR Is coNNected. Remote
ANd AutomAtIc eNGINe stARts ARe Not AvAIlAble If the tRuNk Is opeN.
Slave mode
This mode allows arming and disarming using original vehicle control – an original key, button/
sensor of a keyless access entry system.
Slave mode can be implemented using analog connections or a digital protocol of a vehicle.
!
thIs mode Is dIsAbled by defAult foR A dIGItAl pRotocol. moRe INfoRmAtIoN oN loAdeR.pANdoRAINfo.com. It Is
RecommeNded to ActIvAte the “pRohIbIt dIsARmING WheN A tAG Is AbseNt” to INcReAse secuRIty feAtuRes of the slAve
mode. If thIs mode Is ActIvAted, It WIll be possIble to dIsARm the system oNly WheN A tAG Is IN the coveRAGe zoNe oR usING
the “secRet pIN-code”.
Owner authorization devices and functions
Authorization devices
Authorization devices are Bluetooth devices paired with the system (radio tags, remote control D030,
mobile phone with the app). The devices are used to recognize an owner in the radio coverage zone
of the base unit to arm/disarm the system (Hands Free mode) and to implement immobilizer or Anti-
Hi-Jack functions.
!
INstAll the beepeR If you use AuthoRIzAtIoN devIces.
Hands Free mode
This mode is used for automatic arming/disarming
when an owner with an authorization device is
distancing
or approaching a vehicle.
!
thIs mode Is dIsAbled by defAult. It Is RequIRed to mAke AddItIoNAl settINGs usING the mobIle ApplIcAtIoN oR pANdoRA
AlARm studIo to use thIs mode. quIck Access commANds to mANAGe hANds fRee mode: 223* - ActIvAte hANds fRee
ARmING, 224* - ActIvAte hANds fRee dIsARmING, 222* - deActIvAte All hANds fRee modes.
Immobilizer mode
This mode is used to recognize an owner using authorization devices when the system is disarmed.
When turning on the ignition, the base unit performs a search for authorization devices in the
radiocoverage zone. If there is no any authorization device in the radio coverage zone, the system
will block the engine. Engine blocking will occur immediately or at the time a motion sensor detects
movement, it depends on the system settings. When an authorization device appears in the coverage
zone, the system will exit blocking mode and will continue to work in normal mode.
!
thIs mode Is eNAbled by defAult. It Is RequIRed to mAke AddItIoNAl coNNectIoNs foR thIs mode.
ANTI-HI-JACK-1/2 modes
The Anti-Hi-Jack modes help to prevent aggressive seizure of a vehicle when authorization in case
of disappearance of authorization devices from the radio coverage zone when system is disarmed.
ANTI-HI-JACK-1 mode – The base unit checks if an authorization device is in the radio coverage zone
each time when ignition is on and a door is opened/closed.
ANTI-HI-JACK-2 mode – The base unit constantly checks if an authorization device is in the radio
coverage zone when ignition is on.
If the system cannot detect an authorization device, the base unit will perform a delayed engine
blocking. The siren will play the ‘Engine blocking warning’ ringtone before blocking. The engine will
be blocked immediately or at the time the car starts moving, it depends on the system settings. When
an authorization device appears in the coverage zone, the system will exit blocking mode and will
continue to work in normal mode.
!
thIs mode Is dIsAbled by defAult. thIs mode cAN be set oNly by A pRofessIoNAl specIAlIst
• Multi-button code immobilizer (pin-to-drive) is a function that allows disarming, disabling blocking
and controlling service mode and time channels using original vehicle controls (button, lever or
pedal) and a pre-programmed PIN-code (the “Immobilizer PIN-code”).

Pandora Elite v2 Specifications

General

Brand	Pandora
Model	Elite v2
Category	Car Alarm
Language	English