Pandora Light User Manual

16
Security-service system Pandora Light
CODE IMMOBILIZER FUNCTION PINTODRIVE
Code immobilizer (pin-to-drive) is a function that allows disarming, disabling blocking and controlling
timer channels using original vehicle controls (button, lever or pedal).
To enter the immobilizer code, switch on the ignition and press a programmed button a number
of times equals to the first digit. Pauses between presses should not exceed 1 second. More than 1
second pause will be interpreted as the start of the next digit input. The immobilizer code can consist
max of 4 digits from 1 to 9.
After entering a correct immobilizer code, depending on the settings, either the engine blocking
will be disabled or a programmed time channel will be activated or the system will be disarmed. It is
required to make additional connections and settings to use this function
Additional settings or additional connections are required for the code immobilizer
function.
SYSTEM SETTINS MENU
Enter the main menu with button short press. To switch between menu sections shortly press
button
.
entering settings menu
engine
preheater
12 48
0
engine
preheater:
enabled
Engine
preheater:
disabled
remote start
settings
system
controls
CHECK
channel
controls
1 2 3
4 5 6
7 8 9
remote start
settings
system
controls
CHECK
channel
controls
1 2 3
4 5 6
7 8 9
remote start
settings
system
controls
CHECK
channel
controls
1 2 3
4 5 6
7 8 9
• Control over engine preheater
• Control over timer channels
• Control over car status, view event history
• Remote and automatic engine start adjusting

Pandora Light Specifications

General

Brand	Pandora
Model	Light
Category	Car Alarm
Language	English