20
Security-service system Pandora Light
Check car status
To receive information about engine, interior temperature, battery voltage and fuel level, select
«SYSTEM CONTROLS» menu and shortly press
button.
27°24°12 0V
0
system
controls
CHECK
To exit menu, press and hold button for 1 second.
NOTE: Engine start via temperature is available only if temperature sensor is connected.
The sensor availability depends on the system set. Fuel level will only be shown if it can be read
from CAN-bus or if there is additional connection.
Event history
To view event history in the system’s memory, select «SYSTEM CONTROLS» menu, then shortly press
.
Navigate several last events using
(forward) and (back) buttons. Events are displayed
by showing time of the event and flashing corresponding trigger zone indicators.
arming
12:43
disarming
12:44
System
controls
CHECK
arming
12:43
disarming
12:44
System
controls
CHECK
disarming
12:44