Panduit PTR3E User Manual

INFORMATION TO USER
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause interference in which case the user will be
required to correct the interference at his own expense.
WARRANTY INFORMATION
Our products are warranted to be free from defects in material and
workmanship at the time of sale but our obligation under this warranty is
limited to the replacement of any product proved to be defective within 6
months (for product) or 90 days (for printers) from the date of delivery.
Please remember to fill out the enclosed warranty card and return it to
Panduit. Printer warranty is void if Panduit printers are modified,
altered, or misused in any way. Use of Panduit printers with any product
other than the specified Panduit products for which the printer was
designed, constitutes misuse. Before using, user shall determine the
suitability of the product for his intended use and user assumes all risk
and liability whatsoever in connection therewith.
This warranty is made in lieu of and excludes all other warranties,
expressed or implied. THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE ARE
SPECIFICALLY EXCLUDED. Neither seller nor manufacturer shall be
liable for any injury, loss or damage, whether direct or consequential,
arising out of the use of, or the inability to use the product.
The information contained in this literature is based on our experience to
date and is believed to be reliable. It is intended as a guide for use by
persons having technical skill at their own discretion and risk. We do not
guarantee favorable results or assume any liability in connection with its
use. Dimensions contained herein are for reference purposes only. For
specific dimensional requirements consult the factory. This publication
is not taken as a license to operate under, or a recommendation to
infringe upon any existing patents. This supersedes and voids all
previous literature, etc.

Panduit PTR3E Specifications

General

Brand	Panduit
Model	PTR3E
Category	Printer
Language	English

Summary

Installation

Setting Up the Printer

Loading Labels

Step-by-step instructions for correctly loading various types of labels into the printer.

Loading the Ribbon

Detailed procedure for installing the ribbon correctly for thermal transfer printing.

Label Sensor Adjustment

Configuration

Printer DIP Switch Configuration

Details on setting printer parameters using DIP switches on the front panel and serial adapter.

Printer Adjustments

How to manually adjust printer settings like print darkness, speed, and pitch using the LCD panel.

Cleaning and Maintenance

Adjusting Print Quality

Cleaning Print Head, Platen and Rollers

Instructions and supplies needed for cleaning the printer's critical printing components.

Cleaning the Sensors

Replacing the Print Head

Step-by-step guide for safely removing and installing a new print head.

Troubleshooting

Initial Checklist

Using the IEEE1284 Parallel Interface

Using the RS232C Serial Interface

Error Signals

A table detailing LED indicators, LCD messages, and audible beeps for error conditions.