Appendix A : PowerStation Specifications Faceplate Chemical Resistance
PA PowerStation User Guide A -8
Faceplate Chemical Resistance
The touchscreen of the PA PowerStation is resistant to the chemicals listed
in Table A-11.
Table A-11: Chemical Resistance Chart
Note: Sustained exposure to brake fluid or Gunk
®
brand degreaser can
cause damage to monitor materials.
All PA PowerStation surfaces exposed outside your enclosure are resistive
to the following chemicals:
Touchscreen Chemical Resistance
Acetone Sulfuric Acid 10% Motor oil
MEK Hydrochloric Acid 10% Gasoline
Toluene Acetic Acid 10% Machine oil
Methylene Chloride Phosphoric Acid Salad oil
Isopropyl
Alcohol
Sodium Hydroxide 10% Silicone
Xylene Carbon Tetrachloride Silicone grease G31
Hexane Potassium Hydroxide Kerosene
Butyl Cellosolve Ammonia Water 10% Gas oil
Cyclohexanone Sodium Chloride 26% Silicone oil
Trichloroethylene Zinc Chloride 81% Engine oil
Ethanol Cottonseed Oil Cleanser
Methanol Glycerin
Nitric Acid 10% Grease
• Commercial glass cleaners • Silicone based lubricant
• Motor oil • Alcohol (ethyl, methyl)
• Ammonia (10% dilute solution) • Automatic transmission fluid
• Diesel fuel • Hydraulic fluid
• Gasoline (leaded, unleaded)
To Next Page
Loading...
Need help?
General
