PBK 4 A2
GB
│
MT
│
39 ■
Strimmer/cutter attachment PBK 4 A1-2
4 x screws (with snap ring, washer)
Protective guard
3-tooth cutting blade
Strimmer with cutting filament
Front boom (strimmer/3-tooth cutting blade)
Locking pin
Drive shaft
Extension attachment
Boom
Locking screw
Locking pin
Drive shaft
Accessories
Carrying harness
Protective cover for blade
Chain guard
Organic chain oil
Oil/petrol mixing canister
Safety goggles
4 mm hex key
Spark plug wrench/flat-head screwdriver
Tool bag
Nut M19 x 1.0 (left-hand thread)
Pressure plate cover
Pressure plate
Drive plate
Cutting filament
Funnel
Package contents
1 engine unit
1 hedge trimmer attachment PBK 4 A2-3 (hereinafter hedge trimmer)
1 pole pruner attachment PBK 4 A2-4 (hereinafter pole pruner)
1 strimmer/cutter attachment PBK 4 A2-2
1 extension attachment
1 handle with barrier bar
1 strimmer with cutting filament
1 cutting filament (filament Ø: 2.4 mm/filament length: 6 m)
1 3-tooth cutting blade
1 carrying harness
1 chain guard
1 blade guard
1 oil/petrol mixing canister
1 100 ml organic chain oil
1 tool bag
1 4 mm hex key
1 spark plug wrench/flat-head screwdriver
1 safety goggles PBKZ 1 A1
1 funnel
1 set of operating instructions
Technical specifications
Engine unit PBK 4 A2-1
Engine type 2-stroke engine, air-cooled,
chrome cylinder
Engine output (max.) 1.45 kW/1.97 hp
Cylinder capacity 51.7 cm³
Engine idle speed 3000 rpm
Max. engine speed
with 3-tooth cutting blade 9200 rpm
with strimmer 8700 rpm
with chainsaw 9200 rpm
with hedge trimmer 9200 rpm
Max. cutting speed
with 3-tooth cutting blade 6900 rpm
with strimmer 6525 rpm
with chainsaw 20 m/s
with hedge trimmer 1490 strokes/min
Ignition electronic
Drive centrifugal clutch
Weight (empty tank) approx. 5.6 kg
Tank capacity 1200 cm
3
Spark plug CDK L8RTC
Fuel consumption
at maximum engine output 0.78 kg/h
Specific fuel consumption
at maximum engine output 560 g/kWh
Hedge trimmer PBK 4 A2-3
Cut length 480 mm
Tooth spacing 27 mm
Weight
(ready for use) approx. 2.24 kg
Pole pruner PBK 4 A2-4
Weight (ready for use) approx. 1.6 kg
Oil tank,
recommended fill level 140 ml
3
Cut length approx. 300 mm
Blade Oregon type 120SDEA041
Saw chain Oregon 91P045X
Strimmer/cutting blade attachment PBK 4 A2-2
Strimmer with cutting filament (IAN 352083)
Filament cutting circle Ø 430 mm
Filament length 6.0 m
Filament Ø 2.4 mm
3-tooth cutting blade (IAN 352083)
Cutting blade
cutting diameter Ø 255 mm
To Next Page
Loading...
