30 GB/IE/NI
the surface area calculation will ap-
pear in the lower row
21
of the dis-
play
2
.
Note: You can switch between m²
and sq.ft. To switch between m² and
sq.ft, press and hold the MODE button
10
for 3 seconds. The measurement
unit
22
will be changed.
Addition of surface
areas
1. Measure an area as described in the
section “Measuring surface areas“.
2. Press the Memory button
4
. Saving
symbol “M+“
24
will be appeared
in the display
2
. The measured
surface area is now saved.
3. Press the MODE button
10
. The
product is now ready for the second
measurement.
4. Measure the next surface area as
described in the section “Measuring
surface areas”.
5. Press the Memory button
4
again.
The result of the first measurement
To Next Page
Loading...
