31 GB/IE/NI
will be shown and blinking in the
lower row
21
of the display
2
.
6. Press the + / = button
7
again.
Both measurements are added and
the result will be shown in the lower
row
21
of the display
2
.
7. Repeat steps 2 to to add further
measurements.
8. Press the MODE button
10
to leave
the addition mode. All the measure-
ments will be cleared from the display
2
.
Measuring volumes
1. Slide the function switch
9
to the
position “MEAS / DETECT”. The
display
2
will be turned on. If the
display
2
is not turned on, briefly
press the POWER button
12
to turn
on the display
2
.
2. Press the MODE button
10
twice. The
measuring mode indication symbol
27
for volume will appear on the
display
2
and the letter “L“ (length)
will flash on the display
2
.
To Next Page
Loading...
Need help?
General
