peplink Pepwave AP One Series User Manual

When Others… is selected, it supports custom Dynamic DNS servers by entering its
URL. Works with any service compatible with DynDNS API.
Select Disabled to disable this feature.
User ID /
Username / Email
This setting specifies the registered user name for the dynamic DNS service.
Password
This setting specifies the password for the dynamic DNS service.
Hosts
This setting specifies a list of hostnames or domains to be associated with the public
Internet IP address of the WAN connection.
Update All Hosts
Check this box to automatically update all hosts.
https://www.peplink.com
23
Copyright @ 2020 Pepwave

peplink Pepwave AP One Series Specifications

General

Brand	peplink
Model	Pepwave AP One Series
Category	Wireless Access Point
Language	English

Summary

Hardware Overview

Installation

Installation Procedures

Step-by-step guide on connecting and powering up the access point.

Dashboard

Network

WAN

Configuration for WAN connection details to connect to the Internet.

LAN

Configuration of LAN interface settings, including IP and DHCP settings.

PepVPN

Securely connect remote sites to the access point using PepVPN.

Inbound Access

Define port forwarding rules to allow inbound access from the Internet.

NAT Mapping

Configure IP address mapping for inbound and outbound NAT'd traffic.

AP Tab

AP

Controls for wireless SSID, AP settings, Mesh, and WDS.

Wireless SSID

Status

System Tab

Admin Security

Configure user access, passwords, and network access settings.

Operating Mode

Select the device's operating mode: Router, Bridge, or Bridge without LAN.

Firmware

Process for upgrading the access point's firmware online or manually.

Configuration

Tools

Status Tab

Device

Displays system information, model, firmware, uptime, and MAC address.

Active Session

Client List

Usage Reports

Restoring Factory Defaults