peplink Pepwave AP One Series User Manual

7.5 NAT Mapping
NAT mappings allow IP address mapping of all inbound and outbound NAT’d traffic to and from
an internal client IP address. Settings to configure NAT mappings are located at Network >
NAT Mappings.
*Please note that the following settings will be available only when your access point is
operating in Router Mode.
To add a rule for NAT mappings, click Add NAT Rule.
Server IP Address
This setting specifies the LAN IP address of the server that handles the requests for the
service.
NAT Mapping Settings
https://www.peplink.com
33
Copyright @ 2020 Pepwave

peplink Pepwave AP One Series Specifications

General

Brand	peplink
Model	Pepwave AP One Series
Category	Wireless Access Point
Language	English