peplink Pepwave AP One Series User Manual

8.1.2 Wireless Mesh
Mesh support enables an access point (AP) to connect wirelessly to other wired mesh APs,
providing redundancy in the event of AP failure. Mesh support is available for Wi-Fi networks
802.11ac (Wi-Fi 5) and above.
Please note that the AP’s Mesh settings need to match the Mesh ID and Shared Key of the
selected frequency band in order for the AP to join the network.
To create a new Wireless Mesh profile, go to AP > Mesh, and click Add.
MAC Address
If you have chosen MAC Address as your firewall rule type, enter the MAC address
identifying the machine to allow or deny.
Domain Name
If you have chosen Domain Name as your firewall rule type, enter the Domain Name
identifying the machine to allow or deny.
Mesh Settings
Mesh ID
Enter a name to represent the Mesh profile.
Enable
Check the box to enable the Mesh Profile.
Frequency
Select the 2.4GHz or 5GHz frequency to be used.
https://www.peplink.com
51
Copyright @ 2020 Pepwave

peplink Pepwave AP One Series Specifications

General

Brand	peplink
Model	Pepwave AP One Series
Category	Wireless Access Point
Language	English