36
Opening/closing the tray using the remote control
You can open and close the disc tray using the remote control.
Press and hold the STOP h button on the remote control until the dialog
box shows 'OPENING'or'CLOSING'.
Tip
3 Playback starts automatically.
A menu may appear when a DVD is played back. If the titles and chapters are numbered, press a
number button on the remote control. You can also use the D , C , CH+ A ,
CH- B buttons or number buttons 0..9 to select a menu item and confirm with OK .
You can also access the menu using DISC-MENU on the remote control.
For further information see 'Playing a DVD video disc'.
When a DVD+RW is played back the index overview appears. Using CH- B , CH+ A , N ,
O select the title you want to play back.
Confirm with OK .
For further information see 'Playing back a DVD+RW/+R Disc'.
If playback does not start automatically, press PLAY G .
For further information see ' Playing an audio CD'.
If the 'h' symbol appears in the display, start playback by pressing PLAY G .
If a menu appears on the screen, use the remote control buttons indicated on the screen to select
the menu option you want (PREV= N , NEXT= O ) or with the number buttons 0..9 .
For further information see ' Playing a (Super) Video CD'.
Playing a DVD video disc
C01 2:04
1 If playback does not start automatically, press PLAY G .
This will appear on the display:
title, chapter, elapsed time.
2 To stop playback, press STOP h on the remote control or h on
the DVD recorder.
3 To eject the disc, press OPEN/CLOSE J on the front of the DVD
recorder.
playback
To Next Page
Loading...
Need help?
General
