Pioneer A-40AE User Manual

13
Preparations
En
a Analog Audio Cable
Connect your pre-amplifier and you can use this unit as a
power amplifier. Connect the P.AMP DIRECT jacks of the
unit and the PRE OUT jacks of the pre-amplifier with an
analog audio cable.
0 Do not connect a source device (CD device, etc.) to the
P.AMP DIRECT jack. Doing so may produce high-volume
sound that can damage the unit, speakers, and various
other devices.
0 Setup: Switch the unit to power amplifier mode to use this
unit as a power amplifier. (p18)
a Power Cord
This model includes a removable power cord. The power
cord must be connected only after all other connections are
completed. Make sure you first connect the power cord to
AC IN terminal of the unit and then connect to the outlet.
Always disconnect the outlet side first when disconnecting
the power cord.
Using this unit as a power amplifier
a
Pre-amplifier
Power Cord Hookup
a
SN29403415_A-40AE_En_1804XX.book 13 ページ ２０１８年５月２３日 水曜日 午後３時１９分

Pioneer A-40AE Specifications

General

Purpose	-
Material	Aluminium, Steel
Product color	Black
Volume control	Rotary
Bass adjustment	Yes
Connectivity technology	Wired
Frequency range	10 - 100000 Hz
Audio output channels	- channels
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	106 dB
Total Harmonic Distortion (THD)	- %
Built-in display	No
Digital audio optical in	1
AC input voltage	220 - 230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	150 W

Weight and Dimensions

Depth	323 mm
Width	435 mm
Height	129 mm
Weight	8200 g