Pioneer A-40AE User Manual

17
Basic Operations
En
When connecting two speaker systems (p9), or when
using bi-wiring connection (p10), switch the speakers to
output from by switching to Speakers A or Speakers B, or to
both.
When you have used bi-wiring connection (p10), switch to
SPEAKERS A+B.
1. Press SPEAKERS on the main unit.
The selection changes in the order SPEAKERS A,
SPEAKERS B, SPEAKERS A+B with each press. The
selected speaker indicator lights.
0 There is no audio output from the speakers when
headphones are connected.
When you turn the DIRECT feature on (default value), the
unit bi-passes the tone control circuits that adjust the bass
and treble, taking the shortest route which favors sound
quality.
0 LOUDNESS/BASS/TREBLE (p18) cannot be adjusted
when DIRECT mode is on.
1. Press DIRECT on the main unit or the remote controller to
switch on or off. The DIRECT indicator lights when on.
Switching speaker output
1
Using the Direct Function
1
DIRECT
SN29403415_A-40AE_En_1804XX.book 17 ページ ２０１８年５月２３日 水曜日 午後３時１９分

Pioneer A-40AE Specifications

General

Purpose	-
Material	Aluminium, Steel
Product color	Black
Volume control	Rotary
Bass adjustment	Yes
Connectivity technology	Wired
Frequency range	10 - 100000 Hz
Audio output channels	- channels
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	106 dB
Total Harmonic Distortion (THD)	- %
Built-in display	No
Digital audio optical in	1
AC input voltage	220 - 230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	150 W

Weight and Dimensions

Depth	323 mm
Width	435 mm
Height	129 mm
Weight	8200 g