Pioneer A-40AE User Manual

20
Others
When automatic standby is on (default value), the unit
automatically switches to standby mode after 20 minutes of
no audio input without any operations.
1. Press and hold Í STANDBY/ON on the main unit until
the "DIRECT" and "LOUDNESS" indicators either blink or
light.
0 The unit has switched to the setting mode when the
indicators blink or light and the current setting is
displayed.
2. Take your finger off Í STANDBY/ON for a moment.
3. Switch auto standby on or off by pressing and holding
Í STANDBY/ON again.
- On (default value): "DIRECT" and "LOUDNESS"
indicators are blinking
- Off: "DIRECT" and "LOUDNESS" indicators light
0 The setting mode ends after 5 seconds elapse with no
operations performed.
0 60 seconds before switching to standby mode, the
SPEAKERS indicator and the indicator for the selected
source start blinking.
0 Depending on the connected device, the auto standby
feature may not engage due to factors such as noise.
Useful functions
Setting auto standby
(LIGHTING)
(BLINKING)
OFF
ON
3"
3
3"
1
2
SN29403415_A-40AE_En_1804XX.book 20 ページ ２０１８年５月２３日 水曜日 午後３時１９分

Pioneer A-40AE Specifications

General

Purpose	-
Material	Aluminium, Steel
Product color	Black
Volume control	Rotary
Bass adjustment	Yes
Connectivity technology	Wired
Frequency range	10 - 100000 Hz
Audio output channels	- channels
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	106 dB
Total Harmonic Distortion (THD)	- %
Built-in display	No
Digital audio optical in	1
AC input voltage	220 - 230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	150 W

Weight and Dimensions

Depth	323 mm
Width	435 mm
Height	129 mm
Weight	8200 g