Pioneer BDP-LX70A User Manual

07
38
En
Audio Adjust
From the Audio Adjust menu you can set the Audio DRC (Dynamic
Range control).
Audio DRC
• Default setting: Off
When watching Dolby Digital BD and DVD discs, as well as PC files
with Dolby Digital audio, at low volume, it’s easy to lose the quieter
sounds completely — including some of the dialog. Switching
Audio DRC to On can help by bringing up the quieter sounds, while
controlling loud peaks.
How much of a difference you hear depends on the material you’re
listening to. If the material doesn’t have wide variations in volume,
you may not notice much change.
Important
• Audio DRC is effective with the following types of audio:
– Analog audio from the AUDIO OUT (2ch) and
AUDIO OUT (5.1ch) jacks.
– PCM audio from the DIGITAL AUDIO OUT (COAXIAL/
OPTICAL) and HDMI OUT jacks (see also About the audio
output settings on page 42).
1 Press HOME MENU and select ‘Video/Audio Adjust’ from
the on-screen display.
2 Select ‘Audio Adjust’.
3 Highlight Audio DRC, then use the / buttons to change
to ‘Off’, ‘Level 1’, ‘Level 2’ or ‘Max’ as required.
4 Press ENTER or RETURN to make the setting and exit the
Audio Adjust screen.
Home Menu
Disc Navigator
Home Media Gallery
Video/Audio Adjust
Initial Setup
Video/Audio Adjust
Video Adjust
Audio Adjust
Audio Adjust
Audio DRC
Off
Max

Pioneer BDP-LX70A Specifications

General

Depth	353 mm
Wi-Fi	No
Width	420 mm
Height	103 mm
Weight	6500 g
Full HD	Yes
Device type	Blu-Ray player
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Disc types supported	BD-ROM, CD-R, CD-ROM, CD-RW, DVD-R, DVD-R DL, DVD-RW
Playback disc formats	Blu-Ray video, CD audio, CD video
Supported video modes	1080p
Card reader integrated	-
USB 2.0 ports quantity	1
Audio formats supported	MP3, WAV, WMA
Image formats supported	GIF, JPG, PNG
Video formats supported	MPEG
Analog signal format system	NTSC, PAL
Power consumption (standby)	0.5 W
Power consumption (typical)	35 W
Audio output channels	5.1 channels