1 / (signal reception status) indicator
When digital signal is received,
is dis-
played. Otherwise,
is displayed.
2 Channel number
3 Band indicator
4 Preset number indicator
5 Signal level indicator
Shows the radio wave strength.
6 Voltage indicator
Shows the battery voltage.
! The level displayed on the voltage indi-
cator may differ from the actual voltage
level.
7 Frequency indicator
8 Title name
% Select a band
Press B.
# Band can be selected from among FM1, FM2,
FM3 or AM.
% Manual tuning (step by step)
Push MULTI-CONTROL left or right.
% Seek tuning
Push and hold MULTI-CONTROL left or right,
and then release.
# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
Storing and recalling broadcast
frequencies
The operation is the same as that of the tuner.
(Refer to Storing and recalling broadcast fre-
quencies on page 13.)
Switching the display
Desired information can be displayed.
% Press DScrl.
Press D/Scrl repeatedly to switch between the
following settings:
Station name—artist name—song title—pro-
gram type
# When the tuner has been tuned in to an HD
Radio broadcasting, default display is changed
into station name instead of frequency.
Introduction to advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3 Turn MULTI-CONTROL to select the
function.
BSM (best stations memory)—Local (local
seek tuning)—Seek mode (seek mode)—
Blending (reception mode)
Function and operation
BSM and Local operations are basically the
same as that of the tuner.
Function name Operation
BSM
Refer to Storing the strongest
broadcast frequencies on page 14.
Local
Refer to Tuning in strong signals
on page 14.
Available accessories
En
49
Section
06
Available accessories
To Next Page
Loading...
Need help?
General
