3 Push MULTI-CONTROL right to select
Delete YES.
Delete YES is displayed. Deleting phone is
now on standby.
4 Press MULTI-CONTROL to delete the
phone.
After the phone is deleted, Deleted is dis-
played.
Connecting to a registered
cellular phone
Connecting to a registered phone
manually
1 Use MULTI-CONTROL to select
Connect phone in the function menu.
Refer to Function and operation on page 56.
2 Push MULTI-CONTROL up or down to
select a pairing assignment.
P1 (user phone 1)—P2 (user phone 2) —P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
# Push MULTI-CONTROL left or right to switch
the BD address and device name.
# If the assignment is empty, No data is dis-
played and operation is not possible.
3 Press MULTI-CONTROL to connect the
selected cellular phone.
While connecting, Connecting is displayed.
After the connection is completed, Connected
is displayed.
Connecting to a registered phone
automatically
1 Use MULTI-CONTROL to select
Auto connect in the function menu.
Refer to Function and operation on page 56.
2 Press MULTI-CONTROL to turn auto-
matic connection on.
If your cellular phone is ready for Bluetooth
wireless connection, connection to this unit is
automatically established.
# To turn automatic connection off, press
MULTI-CONTROL again.
Using the phone book
Transferring entries to the phone book
The Phone Book can hold a total of 500 en-
tries. 300 from User 1, 150 from User 2, and 50
from User 3.
1 Use MULTI-CONTROL to select
PH.B.Transfer in the function menu.
Refer to Function and operation on page 56.
2 Press MULTI-CONTROL to enter the
phone book transfer standby mode.
Transfer YES appears in the display.
3 Press MULTI-CONTROL to show the con-
firmation display.
Transfer -/- appears in the display.
4 Use the cellular phone to perform
phone book transfer.
Perform phone book transfer using the cellu-
lar phone. For detailed instructions, refer to
the instruction manual that came with your
cellular phone.
# The display indicates how many entries have
been transferred and the total number to be
transferred.
5 Data transferred is displayed and
phone book transfer is completed.
Changing the phone book display order
1 Use MULTI-CONTROL to select
PH.B.Name view in the function menu.
Refer to Function and operation on page 56.
Invert names YES appears in the display.
2 Press MULTI-CONTROL to change the
name view order.
Inverted is displayed and the name view
order is changed.
Available accessories
En
58
Section
06
To Next Page
Loading...
Need help?
General
