EasyManuals Logo

Pioneer VSX-821-K Operating Instructions

Pioneer VSX-821-K
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Connecting your equipment
23
En
02
02
Plugging in the receiver
Only plug in after you have connected all your components to
this receiver, including the speakers.
Handle the power cord by the plug part. Do not pull out
the plug by tugging the cord, and never touch the power
cord when your hands are wet, as this could cause a short
circuit or electric shock. Do not place the unit, a piece of
furniture, or other object on the power cord or pinch the
cord in any other way. Never make a knot in the cord or tie
it with other cables. The power cords should be routed so
that they are not likely to be stepped on. A damaged
power cord can cause a fire or give you an electric shock.
Check the power cord once in a while. If you find it
damaged, ask your nearest Pioneer authorized
independent service company for a replacement.
Do not use any power cord other than the one supplied
with this unit.
Do not use the supplied power cord for any purpose other
than that described below.
The receiver should be disconnected by removing the
mains plug from the wall socket when not in regular use,
e.g., when on vacation.
After this receiver is connected to an AC outlet, a 2
second to 10 second HDMI initialization process begins.
You cannot carry out any operations during this process.
The HDMI indicator in the front panel display blinks
during this process, and you can turn on this receiver
once it has stopped blinking. When you set the Control
with HDMI to OFF, you can skip this process. For details
about the Control with HDMI feature, see Control with
HDMI function on page 43.
1
Plug the supplied power cord into the AC IN socket on
the back of the receiver.
2
Plug the other end into a power outlet.
VSX-821_826_SYXCN_En.book 23 ページ 2011年2月9日 水曜日 午後3時48分

Table of Contents

Other manuals for Pioneer VSX-821-K

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pioneer VSX-821-K and is the answer not in the manual?

Pioneer VSX-821-K Specifications

General IconGeneral
Receiver typeSurround
RMS rated power550 W
Audio output channels5.1 channels
Signal-to-Noise Ratio (SNR)79 dB
Total Harmonic Distortion (THD)0.05 %
Power output per channel (20-20KHz@8 Ohm)130 W
AirPlayNo
Display-
Product colorBlack
Audio decodersDolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS Neo:6, DTS-HD
Apple docking compatibilityNot supported
HDMI in4
Digital audio coaxial in1
Digital audio optical in2
Multichannel audio input typeTerminals
Headphone outputs7
Headphone connectivity3.5 mm
Connectivity technologyWired
Audio formats supportedAAC, MP3, WMA
Video formats supportedMPEG4
AM band range530 - 1700 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Preset stations quantity30
AC input voltage120 V
AC input frequency60 Hz
Power consumption (standby)0.4 W
Power consumption (typical)415 W
Weight and Dimensions IconWeight and Dimensions
Depth363 mm
Width435 mm
Height168 mm
Weight9200 g

Related product manuals