Controlling the rest of your system
45
En
08
08
Chapter 8:
Controlling the rest of
your system
Setting the remote to control other
components
Most components can be assigned to one of the input
function buttons using the component’s manufacturer
preset code stored in the remote.
However, please note that there are cases where only certain
functions may be controllable after assigning the proper
preset code, or the codes for the manufacturer in the remote
control will not work for the model that you are using.
• TV CONTROL buttons are only dedicated to control the TV
(for example, codes for TV, CATV, Satellite TV or DTV).
• You can cancel or exit any of the steps by pressing
.
• After one minute of inactivity, the remote automatically
exits the operation.
Selecting preset codes directly
1
While pressing , press and hold the ‘1’ button
for three seconds.
2
Press the input function button for the component you
want to control.
The component can be assigned to the BD, DVD, TV, DVR/
BDR, CD, CD-R, VIDEO1 or VIDEO2 button.
• When assigning preset codes to TV CONTROL, press
INPUT here.
3
Use the number buttons to enter the preset code.
You can find the preset codes on page 46.
If the correct code has been input the power of the
component being input will turn on or off.
The power of the component being input will only turn on or
off if that component is able to be turned on directly by
remote control.
4
Repeat steps 2 through 3 to try a different code, or to
enter a code for another component you want to control.
5
When you’re done, press .
Clearing all the remote control settings
You can clear all presets and restore the factory default
settings.
While pressing , press and hold the ‘0’ button
for three seconds.
Default preset codes
RECEIVER
BD DVD
INPUT SELECT
SOURCESLEEP
TV
CONTROL
TV
INPUT
DVR/BDR
CD
CD-R
ADAPTER
iPod USB VIDEO
1
VIDEO
2
SIGNAL SEL
TUNER
RECEIVER
CH
VOL
RECEIVER
RECEIVER
DIMMER
1
4
7
MIDNIGHT
S.RETRIEVER
+
10
2
5
8
SPEAKERS
LEV
LEV
SB CH
DISP
CLR
EQ
PHASE
3
6
9
0
ENTER
CH
CH
CH SELECT
/
SHIFT
HDD DVD VCR
RECEIVER
Input function
button
Preset code
BD 2255
DVD 2256
TV 0291
DVR/BDR 2257
CD 5000
CD-R 5001
VIDEO1 6099
VIDEO2 1053
TV CONTROL 0291
RECEIVER
VSX-821_826_SYXCN_En.book 45 ページ ２０１１年２月９日 水曜日 午後３時４８分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
