The System Setup menu
06
42
En
06
Aspect
Specifies the aspect ratio when analog video input signals
are output at the HDMI OUT terminal. Make your desired
settings while checking each setting on your display (if the
image doesn’t match your monitor type, cropping or black
bands appear).
1
Select ‘Video Parameter’ from the System Setup menu.
2
Select ‘Aspect’ from the Video Parameter menu.
3
Select desired output aspect ratio.
• THROUGH – The input video signal is output unchanged.
• NORMAL – Black bands will appear either at top and
bottom or on both sides.
4
When you’re finished, press RETURN.
You return to the Video Parameter menu.
• If the image doesn’t match your monitor type, adjust the
aspect ratio on the source component or on the monitor.
The Pre Out Setting (VSX-821 only)
Specify either using the surround back speaker or the front
height speaker connection with the PRE OUT SURR BACK/
FRONT HEIGHT outputs. An additional amplifier is required
for the speaker connection.
• Default setting: Surr. Back
1
Select ‘Pre Out Setting’ from the System Setup menu.
2
Select which speaker to connect to the PRE OUT SURR
BACK/FRONT HEIGHT outputs using
/
.
• Surr. Back – Connect the surround back speaker.
• Height – Connect the front height speaker.
3
When you’re finished, press RETURN.
You return to the System Setup menu.
The Auto Power Down menu
Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours.
• Default setting: OFF
1
Select ‘Auto Power Down’ from the System Setup
menu.
(VSX-826)
2
Specify the amount of time to allow before the power
is turned off (when there has been no operation).
• You can select 2, 4 or 6 hours, or OFF (if no automatic
shutoff is desired).
3
When you’re finished, press RETURN.
You return to the System Setup menu.
The FL Demo Mode menu
Set whether or not various demos are to be shown on the
front panel display.
1
Select ‘FL Demo Mode’ from the System Setup menu.
(VSX-826)
2
Choose ON or OFF for the demo display.
3
When you’re finished, press RETURN.
You return to the System Setup menu.
5.Video Parameter
Return
a.Video Converter
b.Resolution
c.Aspect
5c.Aspect
BD
DVD
DVR/BDR
VIDEO1
VIDEO2
TV/SAT
Return
[THROUGH]
[THROUGH]
[ NORMAL ]
[ NORMAL ]
[ NORMAL ]
NORMAL
System Setup
1 . Auto MCACC
2 . Manual SP Setup
3 . Input Assign
4 . Pre Out Setting
5 . HDMI Setup
6 . Auto Power Down
7 . FL Demo Mode
Return
4.Pre Out Setting
Return
Pre Out Surr. Back
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Speaker System
5.Video Parameter
6.HDMI Setup
7.Auto Power Down
8.FL Demo Mode
Return
7.Auto Power Down
Return
OFF
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Speaker System
5.Video Parameter
6.HDMI Setup
7.Auto Power Down
8.FL Demo Mode
Return
8.FL Demo Mode
Return
FL Demo ON
VSX-821_826_SYXCN_En.book 42 ページ ２０１１年２月９日 水曜日 午後３時４８分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
