3
31
Air Separation Fan
From this screen you can change the speed of the air
separation fan. This screen will only be shown if a
cover feeder is present. Select Air separation with the
[arrow] button and press the [OK] button.
You might want to increase the speed of the air
separator fan when running thick, heavy covers.
Set the desired speed in increments of 10% with the
[+] or [-] buttons and press the [OK] button. Normal user
(default) setting is 60%.
Double Sheet Detection
From this screen you can turn the double sheet
detection On or Off. Select Double sheet det. with the
[arrow] button and press the [OK] button.
Normally double sheet detection should be set to On.
However, if you experience “false double sheet feeds”,
for example when running covers that are thick, with
dark print or with mixed prints on the covers, the double
sheet detection can be set to Off.
The Tools Screen
To Next Page
Loading...
Need help?
General
