130
MAINTENANCE AND LUBRICATION
Adjustments
Steering Inspectio n
The steering assembly of the machine should be checked periodically
for loose nuts and bolts. If loose nuts and bolts are found, have your
dealer tighten them before riding your vehicle.
Camber and Caster
The camber and caster are non-adjustable.
Toe Alignment
You can check the toe
alignment of the vehicle
using the following
method. The
recommended toe
alignment is 1/8″ to 1/4″
(.3to.6cm)toeout. If
you discover improper
adjustment have your
dealer correct it.
1. Set the handlebars in a
straight ahead position
and hold t hem in this
position.
If you determine your machine needs the tie rod adjusted for toe
alignment, contact your dealer for service. Steering is a vital part
of your machine that, if adjusted wrong, could lead to severe injury
or death.
WARNING
To Next Page
Loading...
Need help?
General
