43
CONTROLS AND FEATURES
Controls
Engine Electrical Switches
1. Override Switch (Reverse Speed Limiter)
- This vehicle is equipped with a reverse
speed limiter system. To obtain additional
power while backing up, depress the
override button. NOTE: The override
switch also allows activation of Demand 4
Drive (All Wheel Drive) in reverse, if Demand 4 Drive switch i s on.
2. Main Switch - To start the engine, slide the stop switch to the
center “run” position and turn the main key switch clockwise past
the “on” position. Release the key when the engine starts.
3. Engine Stop Switch - The engine will not start or run when the
switch i s in its “off” position. Its purpose is to provide the
operator with a quick means of engine shutdown in case of stuck
throttle or other emergency. NOTE: Both the main switch and the
emergency engine stop switch shut off all electrical power to the
entire vehicle including lights. To stop the engine, slide the stop
switch right or left to the “off” position.
1
2
3
WARNING
Activating the override button while throttle is open can cause loss
of control resulting in severe injury or death.
RUN OFFOFF
3
WARNING
Leaving the keys in the ignition can lead to unauthorized use of
the vehicle resulting in serious injury or death. Always remove
the ignition key when the vehicle is not in use.
To Next Page
Loading...
Need help?
General
