Polaris ATV 2002 User Manual

156
MAINTENANCE AND LUBRICATION
Spark Arrestor (cont.)
4. If particles are still
suspected to be in the
muffler, back the
machine onto an
incline so the rear of
the machine is one foot
higher than the front.
Set the parking brake
and block the wheels.
Make sure the machine
is in neutral and repeat
steps 2 and 3.
5. If particles are still
suspected to be in the
muffler, drive the
machine onto the
incline so the front of
the machine is one foot
higher than the rear.
Set the parking brake
and block the wheels.
Make sure the machine
is in neutral and repeat
steps 2 and 3.
6. Repeat steps 2 through
5 until no more
particles are expelled
when the engine is
revved.
7. Stop the engine and
allow the arrestor to
cool.
8. Reinstall the arrestor
plugs.
1
1
1
1

Polaris ATV 2002 Specifications

General

Brand	Polaris
Model	ATV 2002
Category	Offroad Vehicle
Language	English