7 - 23 BODY
TRUNKBACK/GOLFBACK/
CLIP-IN STAKE BED
Fig. 21 TRUNKBACK
1 - Latch handle
2 - Trunkback lid
3 - Lid lock
Fig. 22 GOLFBACK (clubs not included)
FIG. 23 CLIP-IN STAKE BED
DESCRIPTION
The Golfback is a unit designed to carry two sets of
golf clubs. The Trunkback is a molded plastic box
with a hinged locking lid. The Clip-In Stake bed is a
versatile bed unit designed with a hinged rear
tailgate and acceptable of carrying loads up to 150
pounds. All available back options can be used on
the 2, 4 and 6 passenger models. They are not
available on the short bed or long bed utility
models. All back units have two legs that fit into
pockets mounted on each frame rail. Each attaches
to a locking latch assembly mounted at the top of
the body back panel.
REMOVAL
1. Use key to unlock the latch handle
2. Unlatch unit by turning handle
counterclockwise.
3. Lift unit up to free legs from pockets and
remove.
INSTALLATION
1. Set unit legs in pockets.
2. Apply the Velcro®, hook, or buckle-type safety
strap.
3. Rock unit forward until latch is engaged, and
Pak is secured.
GEM Service Manual November 2007
To Next Page
Loading...
Need help?
General
