To remove the SD/SDHC card, gently push
the card inward with your finger and release
it. Pull out the card carefully.
• Charging the Battery
The battery that comes along with your camera is not charged. You need to
charge the battery before using the camera.
1. Insert the battery into the battery
charger as shown.
2. Connect the power cord to the
battery charger.
3. Plug the power cord to the main
outlet.
The battery charging time is about 2 hours.
The charger LED is in orange, indicating the charging in progress. The charger
LED turns green when battery is fully charged.
To Next Page
Loading...
Need help?
General
