Polycom G7500 Reference Guide

Directory Parameters
Topics:
▪ Using Provisioning Service Credentials to Register with an LDAP Directory
▪ Directory Parameters
This section describes available directory configuration parameters. Included are permitted values and, if
applicable, guidance for configuring related parameters.
Using Provisioning Service Credentials to Register
with an LDAP Directory
You can register your G7500 system with an LDAP directory using the same credentials you used to
register with your provisioning service.
To do this, set dir.ldap.auth.useLoginCredentials=“1”.
With this parameter, provisioning separate username, password, and domain parameters for the directory
service isn’t necessary. For example, if you set dir.ldap.auth.useLoginCredentials=“1”, you
don’t have to set dir.ldap.auth.userId, dir.ldap.auth.password, and dir.ldap.auth.domain.
Directory Parameters
Use the following parameters to configure directory settings on your G7500 system.
dir.gds.auth.password
The Polycom GDS password, if one exists.
String
dir.gds.server.address
Specifies the IP or DNS address of the Polycom GDS.
String
dir.ldap.auth.domain
Specifies the domain name for registering with the LDAP server.
String (0-128)
dir.ldap.auth.password
Specifies the password for registering with the LDAP server.
String (0-64)
dir.ldap.auth.userId
Specifies the username for registering with LDAP server.
String (0-64)
dir.ldap.authType
Polycom, Inc. 17

Polycom G7500 Specifications

General

Brand	Polycom
Model	G7500
Category	Conference System
Language	English