Polycom G7500 Reference Guide

Tone_10
voice.stereo.enable
Enables Polycom StereoSurround software for all calls.
This setting is disabled if you set voice.acousticFence.enable="1".
0 (default)
1
voice.toneControl.bass
Sets the volume level for the low frequencies without changing the master audio volume.
+6
+4
+2
0 (default)
-2
-4
-6
voice.toneControl.treble
Sets the volume level for the high frequencies without changing the master audio volume.
+6
+4
+2
0 (default)
-2
-4
-6
voice.volume.soundEffects
Sets the volume level of the ringtone and user alert tones.
0-10 (default is 3)
voice.volume.speaker
Sets the main audio output volume level going to the speakers.
Even numbers from 0-100 (default is 50)
voice.volume.transmitLevel
Specifies the audio level, in decibels, at which to transmit sound. Unless otherwise advised,
Polycom recommends setting this value to 0 dB.
-6-18 (default is 0)
voice.muteInSleep
If set to "1", microphones are muted when the system goes to sleep.
0 (default)
Audio Parameters
Polycom, Inc. 7

Polycom G7500 Specifications

General

Brand	Polycom
Model	G7500
Category	Conference System
Language	English