Equipment overview
The following sections describe the different components of the EV charger.
Charger
The NB 120 series charger can be provided with two independent hoses with connectors for DC
charging of electric vehicles with CCS-1, CCS-2 and CHAdeMO standards for DC. In addition, it can
optionally include a type 2 socket for AC charging. The possible installation and combination of
connectors depends on the application of local regulations. Each post has a user-interactive touch
screen display and an optional RFID card reader to be used when carrying out a charging session. The
following image shows the charger main components:
To Next Page
Loading...
Need help?
General
