Precor SPINNER SHIFT User Manual

tight, continue procedure to adjust the chain tension.
Chain adjustment instructions
1.
Remove the front chain guard access panel by removing the one fastener using a 5
mm hex key.
\
2. Remove all brake pad flywheel resistance by turning the resistance knob counter clock-
wise (-).
3.
Loosen the left and right axle nuts enough to allow axle movement using a 19 mm
wrench.
12
3 Adjustment Procedures
Chain Drive Tension Adjustment

Precor SPINNER SHIFT Specifications

General

Brand	Precor
Model	SPINNER SHIFT
Category	Exercise Bike
Language	English