l When the bike is not in use, always keep some resistance on the flywheel.
l Clean all surfaces of the frame and plastic components. Keep excess moisture away
from electronic components and dry completely with a lint-free cloth to prevent electrical
shock or damage.
l If your facility allows members to interchange pedals, check all pedals after each class
to ensure pedals are properly secured to prevent damage to them, which may lead to
injuries.
Maintenance Schedule
Preventative maintenance tasks are grouped into Daily, Weekly, Monthly, Quarterly, and Semi-
annual scheduled maintenance tasks. Do all tasks for each scheduled time period.
IMPORTANT: If you determine that the equipment needs service, place an OUT OF
SERVICE sign on the equipment and make it clear to all users that they must not
use the equipment.
Daily
Perform the following maintenance tasks daily:
NOTE:Raise seat and handlebar posts to their highest setting to expose moisture.
Daily Task Instruction
Check pedals. If your facility allows members to interchange pedals, check
all pedals after each class to ensure pedals are properly
secured to prevent damage, which may lead to injuries.
Clean bike frame. Lift the seat and handlebar posts to maximum height, check
for rest and clean. Wipe the bike frame using a clean lint-
free cloth dampened with 30 parts water to 1 part non-
abrasive detergents, see "General Information" on page3.
Use a lint-free cloth to dry the bike. Pay special attention to
the handlebar, pop-pins, resistance knob, chain guard, fly-
wheel, and seat adjustment assembly.
Check warning and instruction
labels.
Verify that the warning and instruction labels are attached
and not missing.
Weekly
Perform the following maintenance tasks every week:
Weekly Task Instruction
Clean floor area under the
bike.
Clean the floor under the equipment. Do not lift and hold
equipment while vacuuming. If you wash the floor, make
sure, make sure it is completely dry.
Test ride bike. Ride each bike to identify any vibration, noises, chain, or belt
issues. Most vibration issues are caused by poor flywheel
65
To Next Page
Loading...
Need help?
General
